HPE Gen9 서버 시간 동기화 문제가 관련하여 설정 방법
HP ProLiant DL580 Gen8 Servers 사용 중인데, 이게 재부팅만 하면 서버 시간이 계속 틀어진다.
보드 안에 배터리도 교환해도 동일한 문제가 발생한다. ㅠㅠ
Bios 설정
1. 서버 재부팅 – F9 – Bios 진입
2. System Configuration -> BIOS/Platform Configration -> Date and Time -> Time Format 에서 Local Time 을 선택 후 날짜 및 시간 변경
3. Daylight Savings Time -> disable
4. F10 눌러 저장 후 Bios 종료
레지스트리 추가
1. 실행 - regedit
2. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation 위치로 이동
3. 오른쪽 버튼 – 새로 만들기 - DWORD(32비트)
4. RealTimeIsUniversal 이름 입력
5. 더블 클릭 설정 값 1로 변경
6. 윈도우 시간 동기화 체크 해제 - 윈도우 시간을 현재시간으로 설정
7. 명령 프롬프트 열기
8. w32tm /config /update 명령어 실행
9. Reboot the server (서버 재부팅)
Document ID: c04557232
Version: 7
Severity: Medium
Release Date: 2015-01-26
Last Updated: 2020-06-10
|
Document Version
|
Release Date
|
Details
|
|
7
|
06/09/2020
|
Updated Description
|
|
6
|
01/03/2018
|
Updated scope to include other affected Gen9 platforms
|
|
5
|
11/21/2017
|
Updated Resolution with updated navigation instructions and added ProLiant m350 server cartridge and Moonshot 1500 chassis as affected
|
|
4
|
09/28/2016
|
Updated Resolution section with additional details.
|
|
3
|
08/17/2016
|
Updated Resolution section with System ROM fix.
|
|
2
|
07/14/2015
|
The following note has been removed from the Resolution section: "The registry setting described in Operation 1 above is incompatible with the NTP service described in Operation 2. If NTP is enabled on the system, the registry setting should not be enabled." These registry settings are compatible and, in some cases, both settings may be required to resolve this issue
|
|
1
|
01/26/2015
|
Original document release
|
When the system time or time zone are changed in the ROM-Based Setup Utility (RBSU) on an HP ProLiant Gen9-series server or HP ProLiant DL580 Gen8 Server running a Microsoft Windows Server Operating System (OS), upon reboot, the system time may default to the OS time-zone offset.
Any of the following HPE ProLiant servers running any version of Microsoft Windows Server 2008 or 2012:
- All ProLiant DL/ML Series Gen9 servers
- HPE ProLiant XL230a Gen9
- HPE ProLiant m350 server cartridge
- HPE ProLiant m710x server cartridge
- HPE ProLiant m510 server cartridge
- HPE Moonshot 1500 Configure-to-order Chassis with Optional OS
System ROM versions beginning with version 1.50 contain a ROM-Based Setup Utility (RBSU) option that can be used to prevent this issue from occurring. This Date and Time BIOS/Platform Configuration option configures the time format and controls how the system date and time is stored in the Real Time Clock and presented to the OS.
By default, the time is formatted for Coordinated Universal Time (UTC). This format can be changed to Local Time, which removes the use of the time zone. This setting can be used to work around interaction issues between the server and Windows Operating Systems running in Legacy boot mode, which can result in an incorrect system time.
Perform the following to obtain the latest available version of the System ROM. This process is the same for all of the servers listed in the Scope section above:
Click the following link: https://support.hpe.com/hpesc/public/home
b. Enter a product name (e.g., "ML350 Gen9") in the text search field and wait for a list of products to populate. From the products displayed, identify the desired product and click on the Drivers & software icon to the right of the product.
c. From the Drivers & software dropdown menus on the left side of the page:
d. Select the Software Type - (For the System ROM- e.g. BIOS (Entitlement Required))
e. Select the Software Sub Type - (e.g. System ROM)
f. For further filtering if needed - Select the specific Operating System from the Operating Environment.
g. Select the System ROM Version 1.50 (or later) Note: To ensure the latest version will be downloaded, click on the Revision History tab to check if a new version of the firmware/driver is available.
Alternately, as a temporary workaround, perform the following operations when booting in Legacy boot mode:
1) Create a new DWORD sized Microsoft Windows registry setting named RealTimeIsUniversal under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation\ and set the value to '1'. This option will cause the Windows operating system to treat the Real Time Clock time as UTC rather than local time.
OR
2) Use Network Time Protocol (NTP) service. For more information regarding Windows Time Service Configuration, visit the following URL:
Windows Time Service Technical Reference at Microsoft.com
CAUTION: This document contains information about how to modify the registry. Use the Registry Editor at your own risk! The registry should be backed up before modifying it. If the Registry Editor is used incorrectly, serious issues could occur that may require a reinstallation of the operating system. For more information about how to back up, restore, and modify the registry, see Microsoft Knowledge Base Article 256986, titled Windows registry information for advanced users. Click here to view Microsoft Knowledge Base Article 256986: ( http://support.microsoft.com/kb/256986/
DISCLAIMER:
Note: One or more of the links above will take you outside the Hewlett-Packard web site. HP does not control and is not responsible for information outside of the HP web site.
This advisory will be updated as further information becomes available.
RECEIVE PROACTIVE UPDATES: Receive support alerts (such as Customer Advisories), as well as updates on drivers, software, firmware, and customer replaceable components, proactively via e-mail through HPE Subscriber's Choice. Sign up for Subscriber's Choice at the following URL: Proactive Updates Subscription Form.
SEARCH TIP: For hints on locating similar documents on HPE.com, refer to the Search Tips document .
Operating Systems Affected: Not Applicable